Giorgio Piola's F1 technical analysis
Topic

Giorgio Piola's F1 technical analysis

Why brake dust has become a bigger F1 driver problem in 2022

The FIA plans talks with teams over the next few weeks to evaluate whether or not action needs to be taken on addressing Formula 1 driver concerns about brake dust.

Why brake dust has become a bigger F1 driver problem in 2022
Listen to this article

The worries from drivers about the health implication of breathing in carbon dust during the course of a race weekend emerged after the Austrian Grand Prix when Sebastian Vettel in particular emerged from his car with a face spattered with black carbon.

Vettel said the long-running issue had worsened this season owing to the new brake duct layout, with drivers now not only subjected to the brake dust generated by a car they’re following, but also dust created by their own car.

"The design of the brake ducts this year, with the front axle, it is blowing all the brake dust into our faces and it is not good," he said.

The regulations were changed for 2022 in regards to the design of the brake duct, in order to limit the potential for teams to generate aerodynamic outwash by blowing air out through the wheels.

As a consequence, the introduction of a mandatory rear facing duct outlet was aimed at keeping airflow centralised. However, this now appears to have triggered consequences on the carbon brake dust issue.

Under the previous regulations, teams were dumping not just airflow, but heat and brake dust directly out through the wheel face.

The freedom led to a raft of solutions that were heavily skewed towards the advantages that teams could yield from an aerodynamic perspective.

This not only resulted in complex brake duct designs but also solutions such as the blown axle and bespoke wheel rim designs

RB16B brake ducts
RB16B brake ducts
1/3
Rolling back just one year and we can see just how complex the design of the brake ducts were under the old regulations. The various solutions used by Red Bull on its RB16B goes to show how channels were used as a means of not only reducing heat transfer from the brakes to the wheel rim and subsequently the tyres, but also as a means of airflow taken in at the inlet scoop bypassing the brakes to better manage airflow as it’s dumped out the wheel face.

Photo by: Giorgio Piola

SF21 front brake duct
SF21 front brake duct
2/3
For comparison, we can see how Ferrari also used different solutions to leverage the different circuit characteristics to improve the temperature relationship between the brakes and tyres, whilst also managing the airflow through the assembly.

Photo by: Giorgio Piola

Ferrari SF70H blown axle
Ferrari SF70H blown axle
3/3
Prior to the ban of blown axles in 2019, teams utilised them as a means of bypassing the brake assembly, with airflow collected by the inlet scoop in order to improve flow conditions around the wheel rim.

Photo by: Giorgio Piola

F1s’s new 2022 regulations have been framed in such a way that their intent, which is to reduce the role that the brake duct assembly plays in generating outwash, is maintained.

A standard supply wheel rim and wheel rim cover is just part of this, with the outer drum creating a seal in order that airflow may only enter or exit from the front and rear scoops.

There’s still some freedom for teams to creatively interpret how to manage the heat and airflow inside the drum, with a large contingent opting to use a fairing that encloses the brake disc, as seen on the Red Bull RB18, below.

Red Bull Racing RB18 brake drum detail

Red Bull Racing RB18 brake drum detail

Photo by: Uncredited

The shape, size and position of the inlet and outlet scoops are derived from the regulations, with scope for individualism amongst the competing design teams.

However, the rear scoop might be one aspect of the design that the FIA looks at in order to alter the passage of the brake dust, with the teams perhaps given too much leeway at this early stage in the regulation cycle. 

It’s also worth remembering that the diameter of the brake discs has increased significantly for 2022, up from a maximum of 278mm to being required to be between 325mm and 330mm – so there is in theory more dust being material to be thrown out.

Furthermore, the diameter of the ‘drilled’ cooling holes that run through the brake disc must now have a minimum diameter of 3mm, which has a dramatic effect on the number and design of the holes being used.

The regulations now also clarify that no cooling holes are permitted in the brake pads.

The culmination of these factors means there may be times when the brake dust being generated is increased through these underlying changes in the team’s design freedoms.

Therefore, in consultation with the teams, the details of the designs of the brake discs and ducts will come under the spotlight – as the aim will be to try to find a good solution without wrecking the reasons air is not blown away from the car.

Longer terms, it’s not impossible that the FIA could even consider something more radical, like a material change for the discs.

2022 brake disc dimension

2022 brake disc dimension

Photo by: Giorgio Piola

 

Read Also:
shares
comments

Related video

Horner: F1's track limits will be "bigger issue" at Paul Ricard
Previous article

Horner: F1's track limits will be "bigger issue" at Paul Ricard

Next article

Ricciardo: Cheering of F1 accidents not acceptable

Ricciardo: Cheering of F1 accidents not acceptable
Why Sainz is key to Ferrari achieving its chairman's F1 goals Prime

Why Sainz is key to Ferrari achieving its chairman's F1 goals

Although Ferrari's chances of title glory in 2022 have evaporated, chairman John Elkann expects the team to have chalked up both championships by 2026. Both require drivers to play the team game and, having now become more comfortable with the F1-75, Carlos Sainz may be Ferrari's key to title glory

How its faltering first turbo car advanced a Williams-Honda glory era Prime

How its faltering first turbo car advanced a Williams-Honda glory era

Stuart Codling charts the development of the Williams FW09, the ugly duckling that heralded the start of the title-winning Williams-Honda partnership

Formula 1
Sep 25, 2022
The Moss-Ferrari farce that current F1 drivers are thankfully spared Prime

The Moss-Ferrari farce that current F1 drivers are thankfully spared

Recent moves within the driver market have reminded Maurce Hamilton of a time when contracts weren’t worth the paper they weren’t written on…

Formula 1
Sep 24, 2022
The seven factors powering Verstappen's 2022 F1 domination Prime

The seven factors powering Verstappen's 2022 F1 domination

After a tooth and nail and, at times, toxic Formula 1 world championship scrap last year, Max Verstappen's march to a second consecutive title has been the exact opposite. But has he really changed in 2022? Here's a dive into what factors have played a crucial role, both inside the Verstappen camp and elsewhere, in the Dutch driver's domination.

Formula 1
Sep 23, 2022
The time lag of ideas that offers intrigue over F1's future fight Prime

The time lag of ideas that offers intrigue over F1's future fight

The pecking order in 2022's Formula 1 season may look pretty static as the season draws to a close, but the unique nature of the cost cap means that preparation for next season takes precedence. New developments are being pushed back to 2023, which could mask the technical development war ongoing...

Formula 1
Sep 22, 2022
The surprise biggest indicator of Ferrari's 2022 F1 points downfall Prime

The surprise biggest indicator of Ferrari's 2022 F1 points downfall

Looking back to the early races of 2022 and Ferrari’s challenge to Red Bull and Max Verstappen was going better than many expected. But it has lost so much ground a surprise rival can even pip Charles Leclerc to runner-up in the standings if given the chance

Formula 1
Sep 20, 2022
The F1 podium-finisher that gave Jordan stability in a year of chaos Prime

The F1 podium-finisher that gave Jordan stability in a year of chaos

The Hart-powered Jordan 194 gave the team hope that the good times were just around the corner. Its 1994 steed wasn’t the start of a move up F1’s pecking order - even if the car did earn the Silverstone team a first pole position. But, as STUART CODLING explains, it did provide a platform for Jordan to become a manufacturer-supported squad.

Formula 1
Sep 18, 2022
BRM V16: How F1's greatest sound has returned to the track Prime

BRM V16: How F1's greatest sound has returned to the track

The first of three new BRM V16s is bringing the greatest-sounding engine to a new audience – and back to the race track - at the Goodwood Revival this weekend. Here is the story of the ambitious 1950 Formula 1 project's resurrection for historic competition

Formula 1
Sep 17, 2022