Giorgio Piola's F1 technical analysis
Topic

Giorgio Piola's F1 technical analysis

The latest tweaks to the controversial Mercedes wheel design

shares
comments
The latest tweaks to the controversial Mercedes wheel design
By: Giorgio Piola
Co-author: Matt Somerfield
Nov 17, 2018, 11:24 AM

Mercedes may not have raced with its controversial wheel spacer design for the past few Formula 1 grands prix, but it has not stopped developing the idea as the latest updates used in Brazil show.

The spacer works in conjunction with the rear wheel to regulate tyre temperatures, but since the United States Grand Prix the team has elected not to use it in a bid to avoid any risk of a protest from Ferrari – which has questioned the legality of the design.

But despite the political background behind its decision to not race the concept, and speculation over what impact this has had on the performance of the Mercedes cars, it is clear the team is still pushing the design hard.

Mercedes W09 rims comparison

Mercedes W09 rims comparison

Photo by: Giorgio Piola

It has continued to test and improve the solution during Friday’s free practice sessions, and as the above drawings show, changes were made to the wheel centre ridges at Interlagos to alter the flow characteristics around the holes that line the inner face.

This is not only helping the team to collect data for the design’s potential use in 2019 but could also be seen as a method of misdirection, much like the airbox cooling bag saga with Ferrari earlier this season.

With the world championships now settled, and ongoing debate about the legality despite the FIA being happy with the idea, it may be that Mercedes goes ahead and races with the spacers in the season-closing Abu Dhabi Grand Prix.

Then it will be up to Ferrari or another rival team to decide whether to let the issue go or lodge a protest and try to prove that Mercedes is benefiting the kind of aerodynamic advantage that a similar system used by Red Bull in 2012 had and was banned.

Red Bull RB8 blown axle wheel detail

Red Bull RB8 blown axle wheel detail

Photo by: Giorgio Piola

Much like the Mercedes system, the Red Bull design relied on compliance from wheel rim designer O.Z, as the pair worked on a design that would utilise the interaction of the brake assembly, stub axle and wheel rim in order to provide a conduit for air to flow between the two.

The main difference is that the sole purpose of the Red Bull design was aerodynamic, paving the way for the static blown axles that have become fashionable since – whereas the Mercedes idea of all about cooling.

McLaren MP4-27 rim, captioned

McLaren MP4-27 rim, captioned

Photo by: Giorgio Piola

McLaren also worked closely with wheel rim supplier Enkei in 2012 to leverage a cooling benefit, as large holes were drilled in the surface between the spokes and outer rim.

It was a solution that was not as complex as the close channel effect we’ve seen at Red Bull and Mercedes, but it shares some similarities with Mercedes in that it was also run at the rear of the car and that it was aimed to bridging a thermal relationship between the brakes, wheel rim and tyres.

Halo tweaks

Mercedes W09 halo fairing comparison

Mercedes W09 halo fairing comparison

Photo by: Giorgio Piola

Mercedes has also been quietly addressing the design of its halo fairing over the course of the season, as it looks to subtly improve the flow of air around the safety device.

Teams are allowed to fair in the standard titanium structure with up to 20mm of bodywork, catering for each team’s individual needs.

It was obvious fairly early on that the teams would use this freedom to create aerodynamic structures that not only improved flow around the structure but also onward to other areas of the car, when the likes of McLaren showed up at the post season test last year with winged fairings.

Up until testing the winged version in Singapore, and then finally racing it in Mexico, Mercedes had been one of only two teams (the other being Red Bull) which had utilised a streamlined version of the fairing.

However, there were changes to the fairing before that, with flank stands appearing in Germany (blue arrow) which have been changed subtly since and alter the behaviour of the airflow that passes by.

Whilst the number of winglets differs up and down the grid, Mercedes opted for a triple-element winglet arrangement atop its halo (red arrow), whilst maintaining the use of the flank stands too.

Next article
Honda weighing up F1 practice run for Yamamoto

Previous article

Honda weighing up F1 practice run for Yamamoto

Next article

Fittipaldi signing addresses Haas sim weakness - Grosjean

Fittipaldi signing addresses Haas sim weakness - Grosjean
Load comments

About this article

Series Formula 1
Teams Mercedes Shop Now
Author Giorgio Piola