Sign up for free

  • Get quick access to your favorite articles

  • Manage alerts on breaking news and favorite drivers

  • Make your voice heard with article commenting.

Edition

Global Global

Chevy, Honda complete test at Indy for 2024 IndyCar engines

Honda and Chevrolet have wrapped up a two-day test at Indianapolis Motor Speedway’s road course aimed at proving parts for the 2024 IndyCar hybrid units.

Rain ambiance on the Indianapolis Motor Speedway pitlane

Chip Ganassi Racing’s six-time IndyCar champion Scott Dixon was driving for Honda, while Team Penske’s two-time and reigning champion Will Power took the wheel for Chevrolet, around the 14-turn 2.439-mile course.

Although the test was for 2024 – when IndyCar will introduce a hybrid system mated to the 2.2-liter, twin-turbo V6s – the event was shrouded in secrecy. Representatives from IndyCar, Chevrolet and Honda all refused to speak either on- or off-the-record about the purpose of the track time. A Chevy spokesperson insisted to Motorsport.com that it was “not a hybrid test”, Honda stated that it may choose to comment on the progress of the company’s 2024 power units within the next two weeks, while IndyCar was unwilling to pass statement on what was a manufacturer-led test.

That said, Motorsport.com has learned that, as Chevy stated, this was not a hybrid test per se. In fact, what Power and Dixon were trialing were all systems other than the MGUs themselves, checking that other new-for-’24 components in the system – including the supercapacitors – are capable of withstanding the stresses of racing, as well as trying out a proposed new gearbox.

The current IndyCar, which has its roots in the DW12 introduced 11 years go, is already considered by most teams and drivers to be overweight thanks to the regularly improved safety systems, not least the aeroscreen introduced from the start of the 2020 season. This problem will be exacerbated by the arrival of the hybrid system in 2024, which appears set to increase the weight of an IndyCar by around 100lbs. The Penske and Ganassi cars in the IMS test are believed to have been ballasted to replicate that weight gain.

To slightly offset this increase, IndyCar has proposed a lighter magnesium casing for the gearbox, and these were on the Ganassi and Penske cars for the last two days.

Although the test was heavily rain affected, there was a plentiful supply of Firestone wet tires on hand, so Power and Dixon were able to plow through the program and an assiduous observer believes that between them the two IndyCar champions clocked up almost 600 laps, or approaching 1500 miles. There were few if any major reliability concerns, and stoppages appeared to be confined to those caused by weather alerts for lightning in the area.

Given this amount of running at IMS over the past two days, it suggests that progress with the hybrid system – a collaboration between Chevrolet and Honda, since the original 2.4-liter engines were put on ice and the proposed Mahle hybrid system was dropped – has been notably swift.

Two major caveats are that the MGUs were not being utilized in the test, and that the bad weather meant that the systems that were in place were put through far less strain than if the track had been dry. Lower grip levels of course mean lower G-forces – lateral in cornering, and longitudinal in acceleration and under braking – but they also mean that the drivers generally stay away from the curbs, so the vertical forces and subsequent vibrations are considerably reduced.

The next “2024-spec” test for Honda and Chevrolet will include the full hybrid system, and is likely to be held again at IMS, this time in late June, after the Road America race.

Be part of Motorsport community

Join the conversation
Previous article Gainbridge joins Andretti in supporting Wheldon brothers
Next article Which of nine Indy 500 winners can conquer the Speedway again?

Top Comments

Sign up for free

  • Get quick access to your favorite articles

  • Manage alerts on breaking news and favorite drivers

  • Make your voice heard with article commenting.

Edition

Global Global