Formula 1 Williams launch
The F1 design clues we can learn from Williams’ maiden test
Williams has now unveiled this year’s challenger, the FW46, having previously had a season launch to present its new livery ahead of the car hitting the track.

Matt Somerfield
Edited: Feb 21, 2024, 9:07 PM
Copy link
Share on Viber

Giorgio Piola's F1 technical analysis
Giorgio Piola is the preeminent Formula 1 technical journalist. View our full selection of Giorgio's technical illustrative content
And, whilst we haven’t seen the FW46 until now, we thought we could be assured of one detail, with the expectation being that the car would feature a push-rod rear suspension layout, rather than the pull-rod it has employed for the first two years of this regulation phase.
That’s due to Mercedes having made that switch this season, with Williams buying its rear end, including the gearbox and rear suspension hardware from it, alongside its power unit supply.
However, it appears that Williams has decided to forsake that option and continue with the same arrangement that it had last season.
Like Mercedes and Aston Martin, which also made the switch to push-rod at the rear, Williams has also retained a push-rod layout at the front of the car.
The Grove-based team elected to switch off development of the 2023 car early, so it could concentrate more on making the steps it needed for this season.
This year’s car is very much an evolution of last year when it comes to the aerodynamic components but there are several changes that warrant attention, starting at the front end with the design of the nose.
Williams FW46
Photo by: Williams
The FW46’s nose has a wider, flatter appearance overall, while the tip has a square chin section that’s narrower than the main body, rather than the smoother, rounder tip than its predecessor.
The front wing continues to follow the development made by the team throughout 2023, whereby the non-moveable section beside the nose has been narrowed, and the moveable flaps are wider.
In terms of the sidepods, Williams has followed the almost grid-wide trend, started by Red Bull, of utilising an underbite arrangement at the front of the assembly to increase the height of the undercut. This also provides the inlet more protection from the turbulence created by the front wheel assembly.
Williams FW46
Photo by: Williams
The rest of the sidepod has been optimized around this new design feature, including a change in the shape of the bodywork along the flank, and there’s also a ‘water slide’ on the upper surface.
The floor edge is similar to the trends we’ve seen up and down the grid during 2023, with the forward section of the edge wing rolled upwards and a series of curled strakes added to help control the airflow as it passes around the surface.
The rear wing now features the semi-detached tip section that we saw many rivals appropriate throughout last season, having been first introduced by Alpine at Monaco.
Meanwhile, the upwashing swage line that Williams introduced at the Australian Grand Prix has also been retained at the base of the rear wing endplate.
Read Also:
Formula 1Williams’ F1 2024 car appears at Bahrain shakedown
Formula 1Why Williams F1 team keeping Sargeant makes more sense than you think
Formula 1Albon: New Williams F1 car feels "very different" in the simulator
We want your opinion!
What would you like to see on Motorsport.com?
Take our 5 minute survey.
- The Motorsport.com Team
Read and post comments
Read also :
Share Or Save This Story
Copy link
Share on Viber
Previous article Red Bull unsure if it can make Mercedes-style F1 sidepods work
Next article F1 testing 2024: When pre-season starts, how to watch and more
Top Comments
There are no comments at the moment. Would you like to write one?
View More & Comment

More from
Matt Somerfield

Gallery: How F1 tech evolved during the 2024 season
Formula 1
Formula 1 Dec 31, 2024
Gallery: How F1 tech evolved during the 2024 season

How McLaren’s rear wing push changed the game in F1
Formula 1
Formula 1 Dec 20, 2024
How McLaren’s rear wing push changed the game in F1

How 2026 F1 rules will help avoid identikit designs
Formula 1
Formula 1 Dec 16, 2024
How 2026 F1 rules will help avoid identikit designs

More from
Williams

What is left to fight for in F1 2026?
Formula 1
Formula 1
Las Vegas GP
1 d
What is left to fight for in F1 2026?

"It's horribly painful" - Williams drops 2026 car upgrades to benefit 2027
Formula 1
Formula 1
Sao Paulo GP
4 d
"It's horribly painful" - Williams drops 2026 car upgrades to benefit 2027
Latest news

2026 MotoGP Portuguese Grand Prix – How to watch, session times & more
MotoGP
MGP MotoGP
Portuguese GP
34 min
2026 MotoGP Portuguese Grand Prix – How to watch, session times & more

Oscar Piastri set for grid penalty at F1 Las Vegas GP
Formula 1
F1 Formula 1
Las Vegas GP
7 h
Oscar Piastri set for grid penalty at F1 Las Vegas GP

Rodney Childers pushes back on NASCAR CEO's claims about car comparisons
NASCAR Cup
NAS NASCAR Cup 9 h
Rodney Childers pushes back on NASCAR CEO's claims about car comparisons

“He’s beaten Alpine on his own” - Racing Bulls on why it kept Liam Lawson
Formula 1
F1 Formula 1
Las Vegas GP
14 h
“He’s beaten Alpine on his own” - Racing Bulls on why it kept Liam Lawson
Feature
Discover prime content
Subscribe and access Motorsport.com with your ad-blocker.
From Formula 1 to MotoGP we report straight from the paddock because we love our sport, just like you. In order to keep delivering our expert journalism, our website uses advertising. Still, we want to give you the opportunity to enjoy an ad-free and tracker-free website and to continue using your adblocker.
You have 2 options:
- Become a subscriber.
- Disable your adblocker.
Subscribe now Already subscribed? Sign in here
Already disabled your adblocker?
Reload page
Manage Alerts
Subscribe




