Giorgio Piola's F1 technical analysis
Topic

Giorgio Piola's F1 technical analysis

Why McLaren joined F1 2021's Z-shaped floor trend

McLaren recently became the eighth Formula 1 team to switch to a Z-shaped floor arrangement, with the entire grid searching for ways to recover the performance lost by new regulations.

Why McLaren joined F1 2021's Z-shaped floor trend
Listen to this article

McLaren recently became the eighth Formula 1 team to switch to a Z-shaped floor arrangement, with the entire grid searching for ways to recover the performance lost by new regulations.

Rewind the clock to last year and the Woking-based team had actually been the first to test a 2021 specification floor, when it installed one on its MCL35 at the Belgian Grand Prix.

This allowed it to assess the aerodynamic havoc that the changes would wreak at the rear of the car, and which all of the teams had undoubtedly seen from their simulation work in CFD and the wind tunnel when the changes were announced.

For the most part, these tests were conducted with immature solutions, so as not to give away too much information to rivals ahead of time.

But the floor used by McLaren in that test formed the basis for the one it used in the opening three rounds this year, with the tapered floor edge following the intent of the new regulations.

Meanwhile, seven of its rivals had either started the season with the Z-shaped floor arrangement or moved to it during those first three races.

McLaren MCL35M floor comparison

McLaren MCL35M floor comparison

Photo by: Giorgio Piola

And, whilst eight teams have now followed a general trend, each of their solutions carries some of their own DNA as they cater for the aerodynamic choices they've made up and downstream of the cutout.

McLaren, for example, has added two angled fins ahead of the cutout in order to intensify the effect it is looking for. It has made only a relatively short portion of their floor parallel with the car's centreline before it once again tapers back toward the rear tyre.

Having made changes to the fins and strakes ahead of the rear wheel during the first three races, it hasn't made further alterations here yet, although it is sure to optimize these in the coming weeks.

Red Bull Racing RB16B floor comparison

Red Bull Racing RB16B floor comparison

Photo by: Giorgio Piola

Red Bull began its campaign with a Z-shaped floor and, whilst the middle section of the floor has also been returned parallel to the car's centreline, you'll note this section is much larger than the McLaren arrangement.

A single strake dominates the floor ahead of the cutout to help create a flow structure in tandem with it, whilst two shorter, curved strakes have been added before the floor begins to taper toward the rear tyre.

As you've probably realised by now, the teams using a Z-shaped floor are essentially giving up some of the floor area that's available to them, as they consider the shape of the floor to be more important to how the airflow is treated.

Mercedes AMG F1 W12 floor

Mercedes AMG F1 W12 floor

Photo by: Giorgio Piola

Mercedes went to the effort of covering the edge of its floor during the car's launch in order that rival teams didn't get a head start on understanding what it had done.

And, whilst the W12 does feature the Z-shape cutout, it's more subtle than some of the other designs and isn't paired with fins or strakes to help set up a more aggressive aerodynamic structure.

The shorter straightened section of the floor leads to a much larger tapered section ahead of the rear tyre, which has also been lifted and has a downward facing Gurney tab on the trailing edge [3].

Mercedes AMG F1 W12 floor

Mercedes AMG F1 W12 floor

Photo by: Giorgio Piola

Mercedes has been much more aggressive with the design of the floor's edge ahead of the cutout too [1], with a wave-like contour used to influence the airflow that might have otherwise been affected by the slots that were allowed previously (inset).

Meanwhile, you'd expect Aston Martin to have a very similar arrangement to Mercedes in many ways, given that both teams are using a low rake set-up. However, it has approached the challenge in a very different way.

Whilst Mercedes has largely focused its recovery efforts on finding performance from the aerodynamic configuration it started the season with, Aston Martin has arrived with a succession of updated parts instead.

Aston Martin Racing AMR21 floor

Aston Martin Racing AMR21 floor

Photo by: Giorgio Piola

Aston Martin is already on its second generation Z-shaped floor design and has by far and away the most aggressive solution on the grid. It features a long parallel section in the middle of the two small tapered sections, which is made possible by a much larger cutout.

To reinforce its aggressive floor cut out, the team has also added two rows of fins near the front of the cutout, both of which are made up of multiple fins and arranged in a crescent shape.

It also has an aerodynamic structure as equally large as Mercedes on the tapered section of floor ahead of the rear tyre.

Aston Martin Racing AMR21 floor Stroll Portuguese GP

Aston Martin Racing AMR21 floor Stroll Portuguese GP

Photo by: Giorgio Piola

In an effort to improve the global performance of the car and potentially increase the effectiveness of the floor cut out, the team fast-tracked new parts to the Portuguese Grand Prix but only had enough for them to feature on Lance Stroll's car, with Vettel forced to wait until Spain for his car to be fitted with them.

The upgrades included a revised forward edge to the floor, with an additional crest added to the 'wavy section', whilst the scroll and Gurney-like extension above it were elongated and taper down to a point at the start of the floor cutout.

Meanwhile, at the rear of the floor, an additional 'r' shaped vane (red arrow, below) was added to the aerodynamic furniture mounted ahead of the rear tyre and the shape of the diffuser was also altered (circled).

Aston Martin Racing AMR21 floor fins

Aston Martin Racing AMR21 floor fins

Photo by: Uncredited

Ferrari didn't start the season with a Z-shaped cutout in its floor, as it favoured the tapered floor design that the rules had intended and it tested in 2020.

However, it quickly deployed a new design for the second race of the season, discarding the trio of fins midway along the floor as a by-product too.

Just as we've seen with most of the teams pursuing the Z-shaped cut out, Ferrari also paired it with an outwardly angled strake on the front corner to help set up the flow structure.

Ferrari SF21 floor

Ferrari SF21 floor

Photo by: Giorgio Piola

In an effort to improve performance further, Ferrari also began testing another new solution on the edge of the floor ahead of the rear tyre in Portugal, with their four-fin set-up making way for a seven-fin arrangement instead.

It only had one of these floors available in Portugal as it took the first steps in collecting real world data with the arrangement, with it or a similar solution expected to follow in the coming races.

Ferrari SF21 floor detail comparison

Ferrari SF21 floor detail comparison

Photo by: Giorgio Piola

shares
comments

Related video

Norris signs multi-year contract extension with McLaren F1 team
Previous article

Norris signs multi-year contract extension with McLaren F1 team

Next article

What will it take to get American drivers in Formula 1?

What will it take to get American drivers in Formula 1?
Singapore Grand Prix Driver Ratings 2022 Prime

Singapore Grand Prix Driver Ratings 2022

A testing return to the Singapore Grand Prix in tricky conditions created plenty of hazards and mistakes for the Formula 1 drivers to fall into. That partly explains a number of low scores, including from a handful of high profile runners, allowing others to take a starring role under the floodlights

The two key contributors to Leclerc's defeat to Perez in Singapore Prime

The two key contributors to Leclerc's defeat to Perez in Singapore

In a marathon Formula 1 Singapore Grand Prix, Sergio Perez’s victory was only assured hours after the race due to a stewards investigation. Throughout the contest the Red Bull driver impressively held off Ferrari’s Charles Leclerc in changing conditions to see the Mexican pull out enough of an advantage to negate his post-race penalty

Why is Oscar Piastri F1's most sought-after rookie? Prime

Why is Oscar Piastri F1's most sought-after rookie?

The Australian rising star is fast, consistent, confident, adaptable and has shown excellent racecraft, but there’s already a taint to his reputation. That hasn’t stopped him becoming the hottest property in this year’s F1 driver market and why McLaren moved fast to snap up the 21-year-old

Formula 1
Sep 30, 2022
The unintended benefit that F1's new engine rules era will deliver Prime

The unintended benefit that F1's new engine rules era will deliver

Formula 1's incoming engine rules shake-up has multiple targets. But it may also solve what has been a bone of contention since the hybrids arrived in 2014. The new plan will allow the series to pump up the volume

Formula 1
Sep 29, 2022
How de Vries made himself impossible to ignore for a belated F1 chance Prime

How de Vries made himself impossible to ignore for a belated F1 chance

Nyck de Vries appeared to have missed his opportunity to break into Formula 1 as he was passed over for more exciting talents who have now become frontrunners and title fighters. But after catching the eye outside of the F1 sphere, before his stunning impromptu grand prix debut in Italy, will it lead to a delayed full-time race seat?

Formula 1
Sep 29, 2022
Can Hamilton produce another Singapore magic moment? Prime

Can Hamilton produce another Singapore magic moment?

The Singapore Grand Prix has, explains Ben Edwards, played an important role in Lewis Hamilton’s Formula 1 career. As the series returns to the Marina Bay Street Circuit for the first time in three years, he faces the latest challenge with an underperforming Mercedes car.

Formula 1
Sep 28, 2022
Why Sainz is key to Ferrari achieving its chairman's F1 goals Prime

Why Sainz is key to Ferrari achieving its chairman's F1 goals

Although Ferrari's chances of title glory in 2022 have evaporated, chairman John Elkann expects the team to have chalked up both championships by 2026. Both require drivers to play the team game and, having now become more comfortable with the F1-75, Carlos Sainz may be Ferrari's key to title glory

Formula 1
Sep 27, 2022
How its faltering first turbo car advanced a Williams-Honda glory era Prime

How its faltering first turbo car advanced a Williams-Honda glory era

Stuart Codling charts the development of the Williams FW09, the ugly duckling that heralded the start of the title-winning Williams-Honda partnership

Formula 1
Sep 25, 2022