Why Ferrari bucked the trend with its F1 2024 suspension choice

With rivals like Mercedes and Aston Martin switching over, it had been anticipated that the entire grid would do so – but Ferrari joined Haas and Williams in doing its own thing.

Haas is no surprise though, because it takes what is supplied by the Scuderia, whilst Williams chose to take last year’s arrangement from Mercedes as it saw an opportunity to work with a known and stable quantity whilst saving money.

But while Ferrari did not make the pull-rod switch that many anticipated, that is not to say it did not make some interesting changes to its suspension layout to better suit the layout of its SF-24.

Ferrari SF-23 and SF-24 comparison

Photo by: Giorgio Piola

Central to this are the alterations made to the length of the chassis (lengthened) and consequently the gearbox casing and rear crash structure (shortened) – to leave the car with approximately the same dimensions overall.

The pull-rod’s inboard position has been altered for 2024, which is likely not only a response to how the suspension performs from a mechanical perspective but also as a means to improve the region's aerodynamic output.

This is especially important when we consider that the team has switched to more of a downwash ramp sidepod solution, having utilised more of a halfway house approach when switching concepts in Spain last season.

The position where the pull-rod intersects the bodywork is now much further rearward than before. This has given the designers more freedom to create the sloping sidepod bodywork and improve the passage of flow into the coke bottle region as a consequence.

There are also changes to the wishbone fairings which, although subtle, have an impact on the airflow’s behaviour.

Meanwhile, the winglets and rear brake duct outlet have also been modified to take advantage of the changes around them, whilst also providing their own direct boost in performance.

McLaren MCL38 steering arm

Photo by: Giorgio Piola

McLaren is another team to have kept the overall DNA of its suspension arrangement, but also making changes to try to unlock more performance this season. 

It’s at the pull-rod front of the MCL36 where we have to pay attention this time though, as the team has repositioned not only the suspension members but also the steering arms in an attempt to improve their aerodynamic output.

The steering arm now resides behind the rear leg of the lower wishbone (red arrow), rather than above and ahead of the front wishbone arm as it did on the MCL60 (inset, red arrow).

This has resulted in a repositioning of the inboard mounting points for the wishbone and pull-rod, with all of their fairings optimised to improve how the airflow behaves around them.

Meanwhile, the lead arm of the upper wishbone retains its high mounted status at the top of the chassis, whilst the wishbone’s rear leg has been placed much lower than in 2023.

This alteration will undoubtedly help provide more anti-dive tendencies but also provides a different passage for the airflow as it makes its journey towards the floor and sidepods aft of the fairing.

Watch: Explained: Mercedes Grabs Resta from Ferrari in F1 Staff Swoop