Analysis
Formula 1 Canadian GP
Technical debrief: The updates that put Ferrari in the fight
Giorgio Piola and Matt Somerfield take a look at the updates that helped to put Ferrari in the fight for victory in the Canadian Grand Prix last weekend.
Giorgio Piola Matt Somerfield
Edited: Jun 15, 2016, 12:04 PM
Copy link
Share on Viber

Giorgio Piola's F1 technical analysis
Giorgio Piola is the preeminent Formula 1 technical journalist. View our full selection of Giorgio's technical illustrative content
Ferrari
As Ferrari continues to search for performance to bring it closer to Mercedes, the team not only had a new turbo available but several aerodynamic changes too.
Front wing

Ferrari SF16-H front wing detail
Photo by: Giorgio Piola
The SF16-H's front wing featured a couple of changes for Canada, with the notched 'r' cascade used earlier in the season returning and changing how the air moves across the surface of the front tyre and out around it.
The outer endplate canard was also amended (highlighted in green), with a L-shaped design employed in place of the slotted canard, which undoubtedly changes the airflow in that region, shifting the wake that is shed from the tyre too and improving performance downstream.
Front brake duct

Ferrari SF16-H brake duct detail
Photo by: Giorgio Piola
The fins that protrude from the brake duct were also revised in Canada, changing the airflow that moves inside the tyre and aft of it.
The inlets position was slightly higher in Canada, changing the upper corners impact on the airflow, whilst the lower corner was also re-profiled and an additional vane added (highlighted in yellow) to work in tandem with the rearward one that was retained.
We're unable to see it in this image as it resides behind the FOM camera and suspension, but a cobra-style fin, similar to what we've seen Mercedes use, could be found mounted from the uppermost horizontal fin.
Sidepod bodywork

Ferrari SF16H side pods, Canadian GP
Photo by: Giorgio Piola
A change to the bodywork that surrounds the upper wishbone was made with a large cut-out in the upper surface exposing a semi-detached hoop.
Much like the other teams that utilise this type of hoop, it's about managing internal airflow structures with the external surface airflow, with one pulling on the other to improve overall efficiency. The change also means that the overall size of the rear outlet is reduced in size.

Ferrari SF16H brake duct, captioned, Canadian GP
Photo by: Giorgio Piola
A comparison with the old bodywork can be seen in the illustration above.
Rear brake drum
Tyre performance is such a critical factor and has been a major focus for Ferrari as it looks to improve its qualifying performance. In Canada it made changes to its rear brake duct as it searches for improved thermal control of the brakes, wheel rims and tyres.

Ferrari SF16-H rear brake drum
Photo by: Giorgio Piola
The flow diverters were significantly increased in size, changing how airflow that sits between the brake drum and wheel rim moves outward through the wheel face, which undoubtedly has an effect on tyre performance as the heat radiated from the brakes is manipulated differently.
Renault
Renault's return to the sport as a constructor is a painful one, as an uphill battle is fought to improve a car that was initially designed for a different power unit, whilst dealing with infrastructure, personnel and budgetary issues that have held the team back over the last few seasons.

Renault Sport F1 Team RS16 front brake duct detail
Photo by: Giorgio Piola
All comeback stories have that element of hardship to them, with growing pains just part of the natural order to things.
Lessons learnt during this phase of their development could be crucial to a better campaign in 2017 though and the burgeoning signs of this could be seen in Canada with the team making a concerted effort to harness the tyres more effectively.
As we know, the Pirelli tyres are extremely sensitive to temperature changes, making them a challenge in their own right.

Renault Sport F1 Team RS16 rear brake duct detail
Photo by: Giorgio Piola
Experiments with heating blankets covering the brake drums, both front and rear, were conducted during the free practice sessions in order to understand how they can introduce heat to the wheel rim as the tyres leave their blankets, keeping temperature in tyre before the car exits the garage and then maintain it during the course of a race stint.

Kevin Magnussen, Renault Sport F1 Team RS16, spare chassis
Photo by: Jon Noble
It seems this method of heating the tyres wasn't the only experimentation that was undertaken though, with Magnussen explaining that his FP3 accident that ruled him out of qualifying was the result of tyres not heated in the blankets, something they'd done earlier in the weekend but had more favourable results with.
We want your opinion!
What would you like to see on Motorsport.com?
Take our 5 minute survey.
- The Motorsport.com Team
Read and post comments
Read also :
Share Or Save This Story
Copy link
Share on Viber
Previous article F1 aerodynamics: A simple guide using a world championship winning car
Next article Timetable of the 2016 European Grand Prix in Baku
Top Comments
There are no comments at the moment. Would you like to write one?
View More & Comment
More from
Giorgio Piola

The fascinating story behind McLaren's most iconic F1 car
Formula 1
Formula 1 Apr 3, 2024
The fascinating story behind McLaren's most iconic F1 car

Emilia Romagna GP: F1 technical images from Imola's pitlane
Formula 1
Formula 1
Emilia Romagna GP
Apr 21, 2022
Emilia Romagna GP: F1 technical images from Imola's pitlane

The F1 downforce choices that proved key at the Saudi GP
Formula 1
Formula 1
Saudi Arabian GP
Mar 29, 2022
The F1 downforce choices that proved key at the Saudi GP

More from
Ferrari

Max Verstappen shares theory on Ferrari's lack of top speed in F1 2026
Formula 1
Formula 1
Las Vegas GP
13 h
Max Verstappen shares theory on Ferrari's lack of top speed in F1 2026

“We lost one second down the straight” – Charles Leclerc upset with Ferrari’s “crazy” Las Vegas deficiency
Formula 1
Formula 1
Las Vegas GP
16 h
“We lost one second down the straight” – Charles Leclerc upset with Ferrari’s “crazy” Las Vegas deficiency

Top 10 F1 cars of the 1980s
Formula 1
Top 10 F1 cars of the 1980s
Latest news

MotoGP Portuguese GP: Full starting grid
MotoGP
MGP MotoGP
Portuguese GP
4 h
MotoGP Portuguese GP: Full starting grid

Oscar Piastri questions "strange" pace deficit to other Mercedes-powered cars in Las Vegas
Formula 1
F1 Formula 1
Las Vegas GP
5 h
Oscar Piastri questions "strange" pace deficit to other Mercedes-powered cars in Las Vegas

Jack Miller furious over MotoGP sprint race schedule change: “We don’t race in the rain anymore”
MotoGP
MGP MotoGP
Portuguese GP
5 h
Jack Miller furious over MotoGP sprint race schedule change: “We don’t race in the rain anymore”

Diogo Moreira admits he is “lucky” after frightening Portimao MotoGP highside
MotoGP
MGP MotoGP
Portuguese GP
6 h
Diogo Moreira admits he is “lucky” after frightening Portimao MotoGP highside
Feature
Discover prime content
Subscribe and access Motorsport.com with your ad-blocker.
From Formula 1 to MotoGP we report straight from the paddock because we love our sport, just like you. In order to keep delivering our expert journalism, our website uses advertising. Still, we want to give you the opportunity to enjoy an ad-free and tracker-free website and to continue using your adblocker.
You have 2 options:
- Become a subscriber.
- Disable your adblocker.
Subscribe now Already subscribed? Sign in here
Already disabled your adblocker?
Reload page
Manage Alerts
Subscribe



