Hard and medium Pirelli tyres for Spa-Francorchamps
Milan, August 19, 2013 – Before the mid-season break, the Formula One teams visited the slowest permanent track on the calendar: the Hungaroring. Now they head to one of the quickest of all: Spa-Francorchamps, in the foothills of the Ardennes. Pirelli is bringing the P Zero Orange hard and P Zero White medium tyres: the two hardest compounds in the range. These are perfectly suited to the high-energy demands of the circuit, with its rapid corners and fast compressions such as the legendary Eau Rouge. One of the key characteristics of Spa is its variable weather conditions, which means that the Cinturato Green intermediate tyres and Cinturato Blue full wet tyres are also likely to be called into play over the course of the weekend.
Jean Alesi: “Spa is a circuit that everyone talks about and over the years I’ve not heard anybody say anything apart from the fact that it is awesome. It’s so fast and so challenging, but one of the key characteristics is the fact that it’s very long. So it’s never monotonous, as you do very few laps compared to other tracks. Managing the tyres takes a special skill: there are lots of fast corners and the length of the track as well as the variable temperatures mean that your tyres can actually cool down after the first part of the circuit. But in qualifying, if you start off with your tyres too warm, then you won’t get the maximum performance from them throughout the entire length of the lap. There’s a huge amount of variation possible in terms of set-up as well: some teams add downforce to get more grip in the mid part of the lap, and that will also have an effect on how the tyres work. Probably the most important characteristic is the high possibility of rainfall. You can have a completely dry corner and then a fully wet track a few corners later. Underneath the water though, the surface is quite abrasive and offers good grip, so you can still drive. The bigger problem is the sudden rivers of water that run across the track in a zigzag shape: you’ve got to know where they are, so that the aquaplaning doesn’t catch you out. There’s also a lot of spray at Spa when it rains, which makes visibility very difficult in wet conditions.”
The circuit from a tyre point of view:
Spa is one of the circuits that has featured on the Formula One world championship since it got underway in 1950. While the track has altered radically over the years (the current layout dates from 1979) it maintains its fast and flowing nature, with an average lap speed in the region of 230kph.
The circuit is just over seven kilometres in length, making this comfortably the longest lap of the year. Cars are on full throttle for around 80% of the lap, sometimes for more than 20 seconds at a time. The variation in the lap means that starting from pole is not as important as it can be on other circuits.
At high speeds, aggressive camber angles can cause blistering as heat builds up around the edges of the tyres. However, teams are expected to comply with Pirelli’s maximum recommended camber angles, which should help prevent this phenomenon.
Technical tyre notes:
The big compression at Eau Rouge subjects the front tyres to the highest vertical load of the season: 1000 kilograms.
The top two last year (Button and Vettel) used a one-stop strategy, while the third-placed finisher (Raikkonen) stopped twice. There was also plenty of variation in the start tyres selected: while most drivers started on the medium tyre, Hulkenberg started on the hard tyre and finished fourth with a two-stop strategy.
The performance gap between the hard and medium tyre is likely to be more than a second per lap.