McLaren to address bodywork burns with cooling fix

shares
comments
McLaren to address bodywork burns with cooling fix
Edd Straw
By: Edd Straw
Mar 6, 2018, 7:44 PM

McLaren is set to modify the internal cooling of the car after suffering minor bodywork burning problems during Formula 1 testing.

 Stoffel Vandoorne, McLaren MCL33
Stoffel Vandoorne, McLaren MCL33
Stoffel Vandoorne, McLaren MCL33
 Stoffel Vandoorne, McLaren MCL33
 Stoffel Vandoorne, McLaren MCL33
Stoffel Vandoorne, McLaren MCL33 stops on track
Stoffel Vandoorne, McLaren MCL33 stops on track

The McLaren MCL33 is running with three additional cooling slots towards the rear of the engine cover in the second week of Barcelona pre-season running.

The slots are used as a ‘quick fix’ for adapting to the different characteristics of the Renault power unit.

Both during last week’s test and on Tuesday, there were small burn marks on the bodywork indicating peaks of temperature from the exhaust that were causing bodywork damage.

“We’re working on a new package with a new engine partner, so we have to detect the heat soak pockets,” Boullier told Motorsport.com.

“While we find some other way to redesign the cooling inside the car, we are using some very quick fixes now. We might keep it actually, we don’t know.

“Maybe we need to redesign some ducts somewhere, or whatever. It’s normal – not only the engine but the car itself [is new]."

Boullier added that the small burn marks that have appeared on the engine cover are not a “show-stopper” and that minor modifications will solve that problem.

“It’s not important, we just have to put some more protection somewhere and that’s it. It’s not a show-stopper.

“A couple of teams in the pitlane have a full-scale dyno, so they can detect it because they run a full car.

“The other ones can’t, so you have to run to detect your issues.”

McLaren caused two red flags on the first day of the second test. One of these was for an electrical shutdown, the exact cause of which is still being investigated, while the other was triggered by a hydraulic leak.

But Boullier is content with progress so far, insisting the car has hit its targets.

“We are every year fixing new targets, so far we have achieved them and now we know we can achieve them on the track as well,” said Boullier.

“I don’t know if it’s good enough to be in front of which teams, because I think everybody is sandbagging a little bit.

 “But the car is good and looks solid on track.”

 
Next Formula 1 article
Video: Mercedes says bold new sidepod design worth 0.25s

Previous article

Video: Mercedes says bold new sidepod design worth 0.25s

Next article

FIA trials F1 standing restart system in Barcelona

FIA trials F1 standing restart system in Barcelona
Load comments

About this article

Series Formula 1
Teams McLaren Shop Now
Author Edd Straw
Article type Breaking news