Hardest P ZERO compounds for Bahrain
Milan, April 15, 2013 – Just one week after the Chinese Grand Prix, Formula One moves to Bahrain where the P Zero Orange hard and P Zero White medium tyres have been nominated. At the Bahrain International Circuit, high track and air temperatures are expected, along with a track surface that is frequently made dirty by sand from the surrounding desert. Bahrain is a fast, flowing and technically demanding circuit, which made it the perfect test venue for Pirelli when the Italian firm was preparing for its Formula One return. Traction and braking are the main demands of the 5.412-kilometre variable width track, with tyre degradation expected to be reasonably high – which is why the two hardest compounds of the range have been nominated.
Jean Alesi: “Bahrain is a circuit that I never raced on during my Formula One career, but I did race there in the Speedcar series – similar to NASCAR – in 2009: in fact I won the race. After a change to the layout the track has now gone back to its original version and it’s a nice circuit that you definitely have to find a rhythm with. If you do this, it will bring you a good lap time but it will also make sure that your tyres stay in the best possible condition, which will be an important part of the race. It’s a circuit that is quite demanding on tyres, but this is an area where the driver always has an influence. Bahrain is also a physically demanding track, so a good level of physical preparation is necessary.”
The tyre from a circuit point of view:
Bahrain is one of the most demanding tracks of the year in terms of longitudinal energy going into the tyres: especially under braking in turns one and 14, and traction in turn 10.
Braking is in fact a key characteristic of the Bahrain International Circuit: in the first corner the cars decelerate from 315kph to 65kph in just 130 metres and three seconds. This places a force on the tyres equivalent to around 4.5g.
Lateral energy is about average for the year, reaching a peak in turn 12.
Last year, the medium and soft tyres were selected – but this year’s compounds are all much softer than their equivalents last year, meaning that the 2013 hard tyre is more similar to the 2012 medium. The top five finishers selected a three-stop strategy at last year’s Bahrain Grand Prix, all starting on the soft tyre. However, the way they used the soft and the medium was quite different. The top-placed two-stopper came sixth.
Technical tyre notes:
The asphalt surface, made up of 60,000 tonnes of imported granite from England, offers good grip when clean and is classified as medium to high in terms of abrasion.
The expected lifespan of the hard tyre, when it comes to wear, should be 15-17 laps, whereas the medium tyre should last for approximately 13 to 15 laps.
The first corner is a particularly critical one. It’s important to exit turn one cleanly in order to make the most of the left-hand kink that follows and get a good drive onto the straights, while avoiding wheelspin and unnecessary tyre wear. Many places are won and lost here at the start.