Subscribe

Sign up for free

  • Get quick access to your favorite articles

  • Manage alerts on breaking news and favorite drivers

  • Make your voice heard with article commenting.

Motorsport prime

Discover premium content
Subscribe

Edition

Global

Dallara makes immediate safety changes to Indy Car

Indy Car release

Alex Tagliani, Team Barracuda - BHA Honda

Alex Tagliani, Team Barracuda - BHA Honda

Michael C. Johnson

Carbon dust permeated a section of the Dallara Auomobili facility in Speedway, Ind., as personnel cut three slots in underwing supports of the new IZOD IndyCar Series cars to lessen lateral and maintain vertical stiffness.

While it might seem contrary to safety objectives, testing by Dallara earlier this week found that the stiffness of the underwing supports could be a contributing factor to the car slightly lifting off the racetrack in three instances over the Indianapolis 500 qualifying weekend when it impacted the SAFER Barrier with the car's centerline parallel to the wall.

"Dallara's response has been immediate to try and make sure all improvements possible could be implemented in time for the race - all credit to them," said Will Phillips, vice president of technology for INDYCAR, sanctioning body of the IZOD IndyCar Series. "Feedback from observers, safety officials and drivers enabled Dallara to have the data very quickly, and their solution and response is a great example of how safety comes first."

The simple modification will be complete for Miller Lite Carb Day on May 25 on all 33 cars in the starting lineup.

Through the nine days of practice and qualifications, five crashes were recorded. All competitors - Josef Newgarden, Bryan Clauson, Oriol Servia, Ed Carpenter and Charlie Kimball -- were checked at the infield medical center and cleared to drive.

The 2.5-mile racetrack is the first oval test for the new car that was designed and manufactured with safety features not incorporated in the car that had been in use from 2003-11.

Crash computer modeling and sled testing of the monocoque, roll hoop, attenuator, side and bottom intrusion panels and nose box was part of the design and development process at the company's Italy headquarters.

Be part of Motorsport community

Join the conversation
Previous article Michael Andretti, Vidan to be inducted to Indy Hall of Fame
Next article Chevrolet brings strong team and driver line-up to Indy 500

Top Comments

There are no comments at the moment. Would you like to write one?

Sign up for free

  • Get quick access to your favorite articles

  • Manage alerts on breaking news and favorite drivers

  • Make your voice heard with article commenting.

Motorsport prime

Discover premium content
Subscribe

Edition

Global