F1

Force India Friday Report

113 views

Australian GP

FP1 objectives Pirelli tyre evaluation, assessment of new rear wing, cooling of engine, KERSand brakes FP2 objectives Long run comparisons at race fuel, test of the DRS race mode and SC systems Weather Overcast with occasional light rain Temperatures Air: 16-17°C Track: 20-23°C

Adrian Sutil (car 14, VJM04/04)

FP1 13th 1:29.314 (19 laps)
FP2 17th 1:28.583 (31 laps)

It was not a bad day. We had quite a few new components on the car to test and the rear wing made a good difference. In the second session we put it all together with a few more sets of tyres, but we had a small issue with the floor and lost a little bit of running. It takes a good three to four laps to get the tyres working for us, on a hard tyre maybe longer, and at the beginning we suffered from understeer and front locking. It is important to look at the other drivers’ lap times now to see what they achieved with the different tyre compounds. I am getting to grips with operating the KERS and the rear wing and am confident in the system. I am aiming to qualify mid-table tomorrow - I think that is possible, so let’s see what we can do.

Paul Di Resta (car 15, VJM04/02)

FP1 Did not participate
FP2 16th 1:28.376 (33 laps)

It was a good to have the opportunity to start my season today. We were able to complete our planned programme and the tyres performed better than I expected. Overall I felt quite comfortable with the new systems on the car, but until I get into a competitive situation it is still too early to say how we’ll do. We have another practice session in the morning, and so we’ll look at the data from today and work on the small issues we had and our programme for Qualifying. I am excited about tomorrow, but at the same time there is a job to be done and my focus is to achieve the best result I can for the team.

Nico Hülkenberg (car 15, VJM04/02)

FP1 18th 1:31.002 (20 laps)
FP2 Did not participate

It was an interesting FP1 and I learnt a lot again about the tyres and the car. Driving with just one set of tyres was pretty difficult because I picked up a flat spot early on which distracted my further running. The rubber wore quite quickly and caused a lot of vibrations, which made it tough to run. But I got some good laps in and collected some good data for the engineers to look at. I am happy to have driven here in Melbourne again and to pick up some more experience and information for the team.

Dominic Harlow, circuit engineering director

We had two objectives for the first practice session; for Nico to gather as much data on the prime tyre as possible and for Adrian to evaluate a new rear wing. Paul drove this circuit last year, so it’s not completely new for him. Over the course of the season Adrian and Paul will both share their car with Nico on a Friday, so we’re simply keeping things balanced. FP2 ran to programme, with long run comparisons at race fuel and a test of the DRS race mode and SC systems. It’s been a productive day and we are looking ahead to what will be a fascinating race weekend.

Source: Force India

Write a comment
Show comments
About this article
Series F1
Tags adrian sutil, australian gp, dominic harlow, force india, nico hulkenberg, paul di resta

User photos

akazoinho
F1

akazoinho

4 photos
Tim Holmes
F1

Tim Holmes

25 photos
EuroRacer
F1

EuroRacer

38 photos
Evan_DeCiren
F1

Evan_DeCiren

27 photos
jimmykwoods
F1

jimmykwoods

2 photos
nickmossdesign
F1

nickmossdesign

1 photos
EricDebris
F1

EricDebris

411 photos
hanmerdesign
F1

hanmerdesign

7 photos
Upload photo